尊敬的客户，您好！本公司所有输送带，片基带均为订制加工产品，请下单时在备注上写清“长*宽*厚，数量”。所有切割加工产品一旦下单，不可更改，不可退换，感谢您的理解与配合！

Process and conveyor belting

Technical belt data sheet

Flexam EX 10/2 0+01 black AS FR IR

Article code 589501

General information

Product group Synthetic belts

Market segment General handling, Airports

Main features Antistatic, Flame retardant, Impact resistant, Low noise

Belt support Slider bed, Rollers, Flat

Belt construction

Fabric tension layer polyester stable 2-ply

Topside Flexam PVC impregnation black

Bottomside fabric low noise natural

Characteristics

Foodgrade (FG) no

Antistatic (AS) yes, in accordance with ISO 21178

High conductive (HC) no

Flame retardant (FR) yes, in accordance with ISO 340:2013

ATEX approval no

Technical belt data

Force at 1% elongationaccording to ISO 2118110.0 N/mm 56.00 lb./in.

Belt thicknessinternal AB method KV.0023.60 mm 0.142 in.

Weightinternal AB method KV.0044.00 kg/m2 0.819 lbs./ft.2

Temperature -15 to 80 °C 5 to 176 °F

Temperature short -15 to 100 °C 5 to 212 °F

Min. pulley diameter flexing 80.0 mm 3.150 in.

Min. pulley diameter back flexing 120.0 mm 4.724 in.

Standard belt width 3000 mm 118.11 in.

Maximum belt width 3000 mm 118.11 in.

Endless instructions

Hot splicing is always preferable. Cold splicing can only be done when the belt is exposed to normal temperatures and the humidity is not

excessive. For the working method, consult the splice information and the equipment literature. Apply the recommended splice as indicated in the

separate information.

Additional information

The information applies at approx. 20°C (68°F). Keep the belt tension to a minimum for maximum belt and conveyor life. Stated is the belt

temperature. The allowable product temperature may vary.

The diameters are valid for a hot spliced belt and at the indicated belt force. Depending on the splice and working conditions (e.g.

temperature), different pulley diameters may be possible or necessary. When fasteners are used the minimum diameters are increased

by approx. 50%.

Consult our specialists for available profiles and accessories.

Printed: July 16, 2015

Edited: May 28, 2015

Because of continuous development, the presented data is subject to alteration. This data replaces that included in previous publications. Ammeraal Beltech excludes any

liability for the incorrect use of the above stated information. Subject to the general terms and conditions of sale and delivery, as applied by its operating companies, are all

activities performed and services rendered by Ammeraal Beltech.

© Ammeraal Beltech